Atlona > Products > Switchers > Matrix Switchers > HDMI > Atlona HDBaseT 16 by 16 HDMI Matrix Switcher over CAT5e/6/7
 
 

Atlona HDBaseT 16 by 16 HDMI Matrix Switcher over CAT5e/6/7

AT-PRO2HD1616M

Extend HDMI and DVI (with HDMI to DVI adapter ex. AT14040) sources up to 328ft(100m) at 1080p or 1920x1200. The Atlona HDMI 16 by 16 Matrix Switcher allows for effortless control of up to 32 devices through IR remote control, RS-232, 3rd party IR controllers and the front panel. With stereo audio embedding combine stereo audio with DVI signals over one CAT5e/6/7 cable. To ensure all audio passes through the 16 by 16 Matrix Switcher supports all Lossy and Lossless formats of Dolby and DTS. The AT-PRO2HD1616M delivers the best quality available with pass through of up to 1080p, 1920x1200, 3D, and Dolby TrueHD and DTS-HD Master audio signals. Receivers are not included with the AT-PRO2HD1616M. The receiver is AT-PRO2HDREC.


  
   
       

   
10 Years Warranty      Next Day
Choose from our global network of authorized partners and solution providers.
Sign into our partner portal for exclusive product pricing.
   

  •   Overview
     
  •   Specifications
     
  •   Related
      Products
  •   Documentation
     
  •   Video
     
  •   FAQ
     
  •   Control
      Drivers
  •   Firmware
      Updates

Go Further with More

  • Extend your audio/visual experience up to 328ft(100m) over CAT5e/6/7 cables. This HDBaseT based technology allows you to send IR, RS-232, video (up to 1080p or 1920x1200) and audio (all Lossy and Lossless formats) signals over a single CAT5e/6/7 cable.

Bidirectional Control

  • Compatible with all 3rd party controllers and IR remote controls, get bidirectional control from the RS-232 and IR ports. Control the matrix and the in zone displays with RS-232 or control all connected devices with the new zone dedicated IR ports.

No Device Left Behind

  • Ensure that even the most difficult display can receive audio and video with 8 programmable memory presets loadable to any source connected to the matrix.

Back Up Power Supply

  • In the event the main power supply becomes inoperable the built in redundant power supply will seamlessly take over the matrix’s energy needs.

Specifications

  Resolution
  Video 480i, 480p, 576i, 576p, 720p@50/60Hz, 1080i@50/60Hz, 1080p@24/50/60Hz
  VESA 640x480, 800x600, 1024x768, 1280x1024, 1360x768, 1600x1200, 1920x1200
  Colorspace RGB, YCbCr 4:4:4, YCbCr 4:2:2
  Color depth 8-bit, 10-bit, 12-bit
  Audio
  Formats PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio
  Sample Rate 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
  Distance
  HDMI up to 10 meters up to 30 feet
  CAT up to 100 meters up to 328 feet
  Signal
  Bandwidth 6.75 Gbps
  CEC No
  HDCP Compliant
  Temperature
  Operating 0°C to 40°C 32°F to 104°F
  Storage -20°C to 60°C -4°F to 140°F
  Humidity 20 to 90% non-condensing
  Power
  Consumption 109W
  Idle Consumption 2.7W
  Supply Input: AC100~240V~2.5A 50/60Hz
Output: DC 24V/6.25A
  Dimension
  H x W x D 177.8 x 439.74 x 322.26 (mm) 7 x 17.31 x 12.69 (inch)
  Weight
  Device 8.22kg 18.12lbs
  Shipping 17.89kg 39.45lbs
  Certification
  Power Supply CE, FCC

Ports

  HDMI
  Features 3D, 1080p, 1920x1200
  RJ45
  Features RS-232, IR, 3D, 1080p, 1920x1200
  AUDIO IN
  Audio Formats PCM 2Ch
  IR IN
  Compatibility Mono to mono IR cables or Atlona IR receiver
  IR OUT
  Compatibility Atlona IR emitter only
  USB B
  Use Firmware updating

Package Contents

QTY   Item
1   AT-PRO2HD1616M
2   24V DC power supply adaptor
2   Power cord
1   IR receiver module
17   IR emitter
1   Remote control
1   User manual

 Manuals



V.1



V.2 (06/2012)



V.3 (4/9/13)
 DataSheet
 IR codes
 CAD files
 SellSheet

Matrix EDID Management
 
   
Pro2HD Training: EDID
 
   
Pro2HD Training: IR Zones
 
   
  Why is the unit not responsive after the firmware update?
 

This unit cannot be updated via Mac computers and if it did, the unit will not boot up properly. To fix this:

    1. Unplug both power supplies on the back of the unit.
    2. Press and hold the cancel button.
    3. While holding the cancel button, reinsert the power cord into the unit. The unit should now boot up in ISP mode and be able to be updated with a standard PC.

  I can only get 2-channel audio on my A/V Receiver when viewing one source on multiple displays.
 

When multiple displays are viewing a single source, the source will output a common format that all screens can handle. So when all of the sources do not have A/V Receivers the source will default to a common 2-channel audio format.

*In order to get multi-channel audio to the AVR, you need to assign a multi-channel EDID to any source that you want a multi-channel signal from. Some displays may not be able to down mix a multi-channel signal and will result in no sound or a repetitive clicking sound.

You can learn EDID or use the internal EDID. Please refer to user manual.


  How do I embed analog audio into the input port?
  Untitled Document If you have a DVI source, this should work without any issues; however if you have HDMI source (the audio which is residing on HDMI channel) takes priority over the Stereo Audio input. There is a way to overcome this by selecting a DVI EDID mode for that input source, this will allow switch to think that it is connected to a source without audio and will auto embed audio from Stereo interface. Please refer to the user's manual for the DVI EDID modes (Page # 11). Please make sure you have the latest firmware 1.1.25

  Why Can’t I get video on ZONE-x?
  If you have already checked your cables and receivers, try doing an EDID learn and assigning the learned EDID to the input. Second, try assigning pre-loaded EDIDs.

  I have a mix of 720p and 1080p TVs, and I want my 1080p TVs to get full resolution.
 

In order to get 1080p resolution, you will need to do an EDID learn from a 1080p display and store it to the sources. In order for the 720p TV to get signal, you will need to use an HDMI down converter, the AT-HD560 and set the resolution to 720p.


  Why my unit keeps locking up?
 

Please make sure your firmware is updated to at least version 1.1.25. If problem still persists, please do the Factory Reset: With the matrix in the off state, hold button 1 and 4, then push the power button. Continue to hold 1 and 4 until you see “Setting Factory Default”. Second, if factory reset does not solve the issue, then reload firmware. To reload firmware, please check the user’s manual posted on Atlona’s product webpage under Documentation tab.


AT-PRO2HD1616M Control Drivers


AMX RS-232 and TCP/IP Control
File Size 476 KB
Date 04.01.13


Clare Controls Available through Clare Controls
Date 11.28.12


Control4 IR Control
File Size 7 KB
Control4 RS-232 Control
File Size 7 KB
Date 11.28.12
Control4 2 Way RS-232 Control
File Size 64 KB
Date 02.13.13


Crestron RS-232 and TCP/IP Matrix Control
File Size 3464 KB
Crestron RS-232 and TCP/IP Matrix & Zone Control
File Size 3958 KB
Date 04.12.13


Elan Available through Elan
Date 11.28.12


Neets IR and RS-232 Control
File Size 31 KB
Date 09.12.12


On Controls On Controls Web based control
Date 09.12.12


RTI RS-232 and TCP/IP control
File Size 480 KB
Date 1.28.14


Savant Savant RS-232 control
Date 03.07.13


Universal Remote Control CCP Accelerator RS-232 Control
File Size 2 KB
Date 11.28.12
Universal Remote Control MSC-400 RS-232 Control
File Size 3 KB
Date 02.13.13


Vantage Logo Vantage
Date 2.26.14

AT-PRO2HD1616M Firmware

Download Firmware version 1.1.28
File Size 118 KB
Date 03.26.14

Update 1.1.28 Includes:

  • Fixes error when receiving "PWON" RS-232 command causes the matrix to reset if already turned on

Firmware version 1.1.26

  • Added RS-232 commands for Matrix IR callback feature
    • IRMatrix default : sets IR to corresponding inputs and outputs (ex. 1 to 1, 2 to 2, 3 to 3, etc.)
    • IRMatrix on : sets IR to factory settings (IR goes to currently selected - ex. input 3, when using output 8)
    • IRMatrix sta : displays IR status ex. IRMatrix default or IRMatrix on

Firmware version 1.1.25

  • Added Internal EDID Mode for assigning EDIDs directly to an input
  • Added RS-232 commands: Lock, Unlock, Version, Type and x1All
  • Fixed failure issue with DVI EDID recording
  • Fixed bug that caused IR remote commands to fail when keylock was turned on
  • Fixed feedback for power on and power off commands to show correctly as PWON and PWOFF, followed by a carriage return and line feed

Firmware version 1.1.19

  • Fixed RS-232 buffere size for multiple commands. (up to 50 characters will pass)
  • Fixed minor RS-232 error
  • Fixed minor EDID error
  • Fixed switching error causing HDCP snow. Black or blue screen will show while switching.

Firmware version 1.1.16

  • Added new RS-232 power status command "PWSTA"
    • Feedback when power is on: "PWON"
    • Feedback when power is off: "PWOFF"
  • Fixed RS-232 feedback errors
  • Fixed HDCP snow when switching

Firmware version 1.1.14

  • Ability to turn the IR on and OFF by the Front Panel
    • Press "Function" then "7" to toggle IR on and off
  • Support for new IR HEX commands for Power On and Power Off
  • New IR control Feature
    • New ability to turn the IR on and OFF
    • RS-232 Command --> "IRON" turns IR on
    • RS-232 Command --> "IROFF" turns IR off

Firmware version 1.1.02

  • Full ASCII code-set zone passthrough supported