Atlona 8x8:2 PRO HDMI Matrix Switch with CAT5/6 and Local HDMI Outputs with 3D Support

DISCONTINUED AND REPLACED WITH AT-PRO2HD88M

Atlona 8x8:2 HDMI Matrix Switch with CAT5/6 and Local HDMI Outputs with 3D Support. (8 x HDMI Receivers are inlcuded) Model: AT-PROHD88M-SR

The Atlona AT-PROHD88M-SR is a True 8x8:2 HDMI matrix switch. The PROHD88M unit features eight HDMI 1.3 inputs, and eight independently switchable HDMI + Twisted Pair outputs to feed eight separate displays simultaneously. Each output features 1 x HDMI and 2 x Twisted Pair connections where both are active at the same time. Twisted Pair outputs are used to connect to the 8 x included receiver modules.

The AT-PROHD88M-SR has the ability of equalization, amplification and re-clocking the signal to ensure HDMI accurate signal transmission through long cables without quality loss. The transmission distance of Twister Pair (CAT5/6) outputs can reach up to 165ft @ 1080P and 250ft if CAT7 is used with infrared control signal. Distance can be extended for additional 165ft with an optional Atlona repeater unit AT-PROHD-RP. It is recommended to use CAT6 (568B terminated) wire to get the longer distance.

 

The Atlona 8x8:2 Matrix can be controlled through : IR Back Channel, RS232, RS485, TCP/IP (LAN) or/and supplied remote control.

Note1: The AT-PROHD88M-SR comes with 8 x Receiver modules, there is no need to purchase additional hardware

Note2: The AT-PROHD88M-SR is able to work on a single CAT5/6/7 cable; however software update is required (The IR pass-through will no longer work in this case). Please download instructions

Matrix Switcher Comparison

Features:

• 3D Capable
• Supporting the latest (HDMI1.3) 36 bit deep color standard, it can be connected even to the latest Blu-ray players, set top boxes, AV receivers or Apple TV.
• HDCP 1.1 and DVI1.0 compliant
• Supports high resolution up to 1920x1200 or 1080p over local HDMI or included Twister Pair receiver modules
• The eight outputs are capable of displaying the same or different sources simultaneously. Each output includes one HDMI A type connector and a set of dual RJ45 connectors as the second mirrored HDMI output. The two outputs work simultaneously.
• Supports all latest HDMI audio formats including Dolby TrueHD and DTS-HD
• EDID management function stores 100 most common EDID recordings with ability of programming new EDID recording by the user
• Reclocking for both inputs and outputs allows long HDMI Cables cables to be used on both inputs and outputs
• Supports 6 x control options: Panel buttons, Local IR, IR call back from remote locations, RS232, RS485 and TCP/IP (LAN).
• IR commands and RS232 commands are provided
• Use any remote to control the switch, switch is capable of recording any IR commands and user can choose what they mean.
• Silicon Image Chip-Sets allow %99.99 compatibility with all the AV gear (we only use Best). Silicon Image was a creator of HDMI standard.
• Rack Mountable (comes with rack ears)
• Control4, RTI, Crestron, AMX compatible
• Easy installation

Technical Specifications:

• Video Bandwidth: 6.75Gbps
• Max Resolution : 1080p/1920 x 1200
• HDTV Formats Supported: 1080P/1080i/720P/576P/480P/576i/480i
• PC Formats Supported: VGA, SVGA, XGA, SXGA, UXGA, WXGA,WSXGA, WUXGA
• Audio Format Supported: DTS-HD, Dolby trueHD, 7.1ch and others
• Max. HDMI Cable Input Distance: 50ft
• Max. HDMI Cable output Distance: 50ft
• Max. Twister Pair output Distance 165ft @1080p (optional repeaters are available to add additional 165ft Model is AT-PROHD-RP)
• Twister Pair Type: CAT5/6/7 (568B termination)
• Power Consumption: Main Unit: 35wtts (Max); Receiver Unit 100mwtts (Max)
• Dimensions (Inch): Main Unit:18.89L×11W×5.5H Receiver:3.3L×1.8W×0.8H
• Dimensions (mm): Main Unit: 480x280x140  Receiver: 84Lx46Wx20H
• U Dimensions: 4U
• Net Weight: Main Unit: 7.6 LB; Receiver Unit: 0.6LB
• Net Weight: Mail Unit: 3.44kg; Receiver Unit: 0.27kg
• U Dimensions: Without faceplate 3 1/2U; With Faceplate 4U

Package Includes:

Main Unit:

• 1 x AT-PROHD88M-SR
• 8 x IR emitter cables (marked IR TX),
• 1x IR receiver cables (marked IR RX)
• 1 x USB to RS232 cable
• 1 x 12VDC Universal Power Supply. (UL Listed)
• 1 x Rack Mounting ears.
• 1 x IR Remote.

Receiver Modules:

• 8 x Receiver Units AT-PROHD88M-R
• 8 x IR receiver cables (marked IR RX),
• 8 x 5VDC power supply
• 8 x Rack Mounting ears.
• 1 x Operating Instructions.
• 1 x CD with RS232 commands and control software.

AT-PROHDxxM-SR Matrix Switchers

Download	PROHD Dynamic TCPIP Setup
Operating Systems	Windows XP and 7
File Size	6.1 MB
Date	01.16.12

Download	PROHD Static IP Setup
Operating Systems	Windows XP only
File Size	9.8 MB
Date	01.26.12

Download	COM Control Software
Operating Systems	Windows XP and 7
File Size	331 KB
Date	08.31.10

Note: If you're getting an error or having trouble running the COM Control software, make sure you are using administration permissions. Running the Com Control as an admin will make most errors disappear.