Atlona 1X4 HDMI Splitter with CAT5/6 Outputs and 3D support (SENDER ONLY) (DISCONTINUED AND REPLACED WITH AT-HD-V14SS)

 

Atlona 1X4 HDMI Splitter with CAT5/6 Outputs with 3D support. (SENDER ONLY). Model: AT-HD14SS

The Atlona 1x4 HDMI splitter is the perfect solution for those who want to display a single source on 4 or more displays using a Single Twisted Pair Cat5 or Cat6 Cable. AT-HD14SS is capable of HDTV resolutions up to: 1080p@110ft and 1080i@200ft

Note: A receiver unit (Balun) is required for each display and sold separately (Model: AT-HDRS or AT-HD15SRS). For longer runs use the AT-HDRP for up to an additional 130ft over 1080p and 200ft over 1080i.

Products Features:

• HDMI over Single Cat5/6 (High Resolution Audio and Video)
• HDMI 1.3C with 3D support
• HDCP compliant
• 1080p@110ft (35m) and 1080i@200ft (60m)
• Supports 5.1 and 7.1 Digital Audio
• Silicon Image Chip-Sets allow 99.99% compatibility with all the AV gear (we only use Best)
• Built-In HDMI Repeater to avoid any signal loss if long input cable is used
• Supports default HDMI EDID and records the EDID of each display
• Extends up to 60m (200ft) (1080i) of output single CAT5 or Cat6 cable
• Extends up to 35m (110ft) (1080p) of output single CAT5 or Cat6 cable
• Wall-Mountable
• Easy installation
• Compatible with the AT-HDRP for those extra long runs

Technical Specifications:

• Video Bandwidth: 225 MHz
• HDMI 1.3C
• Resolutions up to 1080p or 1920x1200
• Power: 5V DC (110/240v)
• Input: 1 x HDMI
• Output: 4 x RJ45
• Dimensions:
• Shipping Weight: 3 lbs.

Package Contents:

• 1x AT-HD14SS
• 1x 5V power adapter (110/240v)
• 1 x User Manual